• Motenergy ME1304 Motor

The Motenergy ME1304 motor
A 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap, otherwise known as PMAC motor. 

1) Designed for 180 amps continuous, 450 amps for 2 minutes.
2) Maximum rotor speed of 5000 rpm.
3) Recommended 6 litres per minute of water cooling (Can also be used as an Air-Cooled, Totally Enclosed motor without water cooling, but de-rated to 125 amps continuous.)
4) Weight is approx 36 pounds
5) Rating of 14.5 kW continuous with a 96 VDC battery pack voltage.
6) Sine/cosine rotor position sensor
7)  KTY84-130 Temperature sensor in the motor windings
8) 
Designed for 24 to 96-volt battery-operated systems.


This is a direct replacement for the Motenergy LLC ME0201013001 and ME0201014201 motors. It is also a bolt-in replacement for the Brigs & Staratton Etek motor.

This Brushless motor requires a 3 Phase 8 Pole PMAC controller. 

These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4. 
NOTE: We do not recommend the use of square wave controllers with these motors. This may reduce the durability and efficiency of the motor, as well as void it's warranty.

Motor
Continuous Current (A)
Continuous Output Power (kW)
Maximum Speed (RPM)
Maximum Torque (Nm)
Maximum Voltage (V)
Minimum Voltage (V)
Peak Current (A)
Peak Output Power (kW)
Peak Torque (Nm)
Speed Sensor Type
Temperature Sensor Type

Motenergy ME1304 Motor

  • Brand: Motenergy
  • VoltSport Part Number: 016-008-001
  • Availability: In Stock

Related Products

ME1304 Gen4Size6 48V Kit

ME1304 Gen4Size6 48V Kit

VoltSport Pre-Built Drive Kit SystemsHere at VoltSport, we specialise in the design and integra..

ME1304 Gen4Size6 80V Kit

ME1304 Gen4Size6 80V Kit

VoltSport Pre-Built Drive Kit SystemsHere at VoltSport, we specialise in the design and integra..

Tags: motenergy, mot, energy, ME1304, 1304, PMAC, speed sensor, 72 VDC, 100 amp