Gen5 Size9 400V 400A

The Sevcon Gen5 provides a highly adaptable solution for motor control applications. The Size9 variant runs at up to 400V input and can provide a peak current output of 400A. The unit supports regenerative braking to reduce power consumption. A fully isolated logic and IO circuit allows for total separation of the high and low power system buses to improve safety and reliability. High voltage power connections are sealed with a protective cover and cable glands to maximize IP protection and touch safety. The revolutionary new "User Code" feature allows for further customization. 

Recommended Applications:

The High Voltage Gen5 range of motor controllers is suitable for applications including:

• Ideal for high powered automotive applications including cars, light commercial and bus and truck.
• Separate operating modes allow for the unit to act as a fully fledged VCU master or as a simple torque slave unit.
• Specifically designed with a high level of functional safety in mind.

Communication:

The Gen5 supports configuration, calibration, control and status monitoring over a CAN bus. Fully and partially supported communications protocols include:

• CANopen
• J1939
• Sevcon H and I Protocol
• UDS
• Custom communication protocols using the "User Code" feature

To take full advantage of the features of CAN communication on a Sevcon product, an IXXAT CAN to USB device with Sevcon DVT Software subscription will be required.

Ingress Protection:

The Sevcon Gen5 range is IP66 rated, providing total protection against dust ingress and protection against water ingress during high powered pressure washing.

Motor Support:

The Gen5 range provides support for the following motor types:

• PMAC
• Induction machine

Encoder Support:

The Gen5 range provides support for the following sensor types:

• AB
• UVW
• Sin/Cos
• Resolver

Connectivity:

Power connections are made through M10 terminal posts. This includes the DC link from a battery or other source and 3-phase output to the motor.

Signal connections are made through a 48-Way CNC connector. Signal connections include:

• 1x Encoder connection (power supply and signal connections)
• 2x CAN bus connection (termination available)
• 4x Configurable digital inputs
• 4x Configurable analogue inputs
• 2x Configurable contactor driver outputs
• 2x Thermistor input
• 5V and 10V power supply outputs rated for 200mA supply each
• Automotive standard key-switch/ignition inputs
• High voltage interlocks

Documents:

Datasheet (PDF)