Menu
Your Cart
Welcome to the new VOLTSPORT LTD website. To report any issues/errors please email web@voltsport.co.uk

Motenergy ME1118 Motor

The Motenergy ME1118 motor 
A 3-phase, Y-connected Permanent Magnet Synchronous Motor with an axial air gap, otherwise known as PMAC motor. 


Commutation is achieved by an internal Sine/Cosine speed sensor, an input voltage of 24-72 VDC, 100 amps continuous, up to 300 amps for 30 seconds. 


1) This is an 8 pole motor (4 pole pairs).
2) The Phase to Phase winding resistance is 0.0095 Ohms.
3) The maximum recommended rotor speed is 5000 RPM.
4) Voltages from 0 to 96 VDC input to the control.
5) Torque constant of 0.19 Nm per Amp
6) The Inductance Phase to Phase is 0.12 Milli-Henry.
7) Armature Inertia is 52 Kg Cm Squared.
8) Continuous current of 80 Amps AC.
9) Peak current of 220 Amps AC for 1 minute.
10) Weight of 23 pounds.
11) Peak Stall Torque if 60 Nm.
12) This is an Open Frame, Fan Cooled motor.
13) Has an internal temperature sensor.

These patented axial flux motors are designed to work with sinusoidal (sine wave) controllers such as the Sevcon Gen4. NOTE: We do not recommend the use of square wave controllers with these motors. This may reduce durability and efficiency of the motor, as well as void it's warranty.







Motor
Continuous Current (A)
Continuous Output Power (kW)
Maximum Speed (RPM)
Maximum Torque (Nm)
Maximum Voltage (V)
Minimum Voltage (V)
Peak Current (A)
Peak Output Power (kW)
Peak Torque (Nm)
Speed Sensor Type
Temperature Sensor Type

Write a review

Please login or register to review
Another cookie message, but this time...from Voltsport!
We use cookies (none tasty-kind) just to track visits to our website, we store no personal details. By using our website you accept this!