VoltSport Pre-Built Drive Kit Systems
Here at VoltSport, we specialise in the design and integration of electric drive systems. We know that we can make the path to electric conversion simpler by supplying our pre-built kits. Contact us for a quote, with as much information as you have, and we can make sure you have all the components you need (and ones you didn't know you needed!)
All our kits are based around the same core components, the motor, the controller, a contactor and wiring harness.
The motor: ME1304
The controller: Gen4 Size 6 80V
The contactor: Albright SU80
We create every kit to order, so we can tailor the kit to suit your application. This could be marine, bike, car, or something entirely different. The controller can be set to run in torque mode, similar to an on-road vehicle throttle response, or in speed mode, where the throttle demand sets the motor speed. This would be a typical marine system.
Extra components can be included as required. We have some throttles available and can calibrate your kit to use these, or to use one of your choice.
Sevcon DVT Software & IXXAT Dongle
The IXXAT dongle is required to communicate with Sevcon Motor Controllers using their specialist calibration software, no other communications dongles can be used.
The IXXAT USB to CAN Compact Interface allows communication between devices on a CAN bus and configuration tools on a PC or MAC. Widely used in industry and compatible with many standard configuration programs.